Switch On; Weighing; Tare - Soehnle Professional 7730.65 Instrucciones De Uso

5.3

Switch on

5.4

Weighing

Weighing requires both legs of the patient to be positioned on the weighing platform of the
scale.
5.5

Tare

www.soehnle-professional.com
Press the ON/OFF button while the scale is not under load.
After the test routine has completed, the calibration counter is displayed
briefly followed by the zero in the display
Calibration counter: No error messages.
The scale is ready for weighing.
Carefully step onto the weighing platform of the scale.
The weight is displayed automatically after a load is placed onto the
scale.
Manual tare
Position the item onto the weighing platform followed by pressing the tare key.
Manual tare entry
This requires "Manual Tare Entry" to be assigned to the function key
in setup mode. See user mode 3710 for programming the function key
(see separate instructions 470.702.099)
 UCAL 4 Pos. 02 = value 4.
Program the value with the tare key or the function key. Briefly pressing
increments the value. Pressing and holding the key increases or
decreases the reading.
The programmed value is saved by pressing the print key.
.
39