Kit Assembly - Metra 95-9011 Instrucciones De Instalación

1. Snap the ISO DDIN brackets to the inside
edge of the radio housing. (Figure A)
2. Slide the DDIN radio into the DDIN
bracket/radio housing assembly and
secure the radio to the kit using the
screws supplied with the radio.
(Figure B)
3. Snap the DDIN trim plate onto the
housing/radio assembly. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the radio for proper
operation.
5. Reassemble dash in reverse order
of disassembly.
6

KIT ASSEMBLY

(Figure A) (Figure B)
1.800.221.0932
|
MetraOnline.com