Ega Master 79612 Manual De Instrucciones página 33

Wear respiratory protection.
Use respiratory protection as instructed by your employer and as required by
occupational health and safety regulations.
Potentially generated or disturbed dust and fumes in the working environment or
from using the machine can cause ill health (e.g. cancer, birth defects, asthma and/
or dermatitis).
• Carry out risk assessment regarding dust and fume hazards and implement
appropriate measures.
• Keep the working place clean.
• Keep in mind that working in certain materials may create dust and fumes
causing a potentially explosive atmosphere.
Remark: Some types of metal may have toxic coatings.
Please pay particular attention to avoid skin contact and breathing in, when working with those
materials. Ask your material supplier about special safety instructions and stick to them.
SAFETY INSTRUCTIONS FOR PREVENTION OF PROJECTILE HAZARDS
Wear impact-resistant safety goggles (EN 166) – This refers to the operator, as
well as for the persons within the vicinity of the machine. Assess and determine the
grade of protection required depending on the individual case. The risks to others
should also be assessed at this time.
On overhead work, wear a safety helmet (EN 397). If a work piece,
accessories, inserted tools, or the tool itself breaks, there is danger from high
velocity projectiles.
• Before using the machine check all parts for damages.
• Replace damaged parts immediately.
• When working on brittle material make sure that you are protected against harmful splinters.
SAFETY INSTRUCTIONS FOR PREVENTION OF ACCESSORY HAZARDS
Only use machine tools, accessories and consumables, which are recommended by the
manufacturer. Make sure choosing the correct size and the correct type. Only use accessories, which
are in proper condition and do not touch them during operation.
WARNING – Injury due to carelessness.
SAFETY INSTRUCTIONS FOR PREVENTION
OF DUST AND FUME HAZARDS
33