Environmental Regulations - Ega Master 79612 Manual De Instrucciones

Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively the
sectional drawings (see repair instruction). All work regarding disassembly and re-assembly, as well as
maintenance and repair have to be executed by the manufacturer or skilled staff only.
disregarding of instructions. Shut down the machine properly and let it cool down to
the ambient temperature.
Retrofits or modifications of the machine can affect the explosion protection.
Therefore, retrofits or modifications are allowed upon agreement with the
manufacturer only.
The explosion-proof machine is designed in the type of protection "c" constructive safety. All
work executed on the machine, influencing the explosion protection, e. g. repairs with mechanical
machining, require an approval of an authorized expert or have to be done by the manufacturer. The
internal structure must remain unmodified.
The manufacturer service is available for all maintenance, repair and assembly work, as well as for
damages.
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature fluctuations as
well as mechanical damage.
Always store the machine in a way that important machine instructions, e. g. on stickers and signs,
are legible.
Dispose worn out/defective machine tools according the local/national regulations. Fully
disassemble machine for the necessary disposal. Separate materials according to local environmental
specifications. Dispose environmentally hazardous greasing, cooling or cleaning agents in order to
avoid environmental contamination.
When working on or with the equipment, it is imperative to observe all legal requirements in regards
to waste-disposal and proper recycling.
In particular during installation, repair and maintenance work, water damaging agents, such as
36
DISASSEMBLY- RE-ASSEMBLY
DANGER – Working with the machine without appropriate preparation and
NOTICE – Special instructions apply for the repair of explosion-proof machines.

ENVIRONMENTAL REGULATIONS

STORAGE
DISPOSAL