Polarized Reflected Light Observation Procedures; B-1000Pol-I - Optika Italy B-1000 Serie Manual De Instrucciones

11. Polarized reflected light observation procedures
11.1

B-1000POL-I

Set the main switch to "II"
Turn on the microscope and adjust light intensity
Set the Bertrand lens ring on "O"
Insert analyzer and reflected light polarizer into the light
Set on "R" the light path selector on the reflected
Insert 10x objective into the light path
Place a mirror on the stage and check
Focus the specimen
Adjust aperture and field diaphragms
Insert in the light path the desired objective and
path
light illuminator
for light extinction
Adjust interpupillary distance
Adjust diopter
Center optical axis
focus the specimen
Adjust brightness
Begin observation
(Used commands)
Main switch
ON-OFF key on the keyboard
Brightness adjustment knob
Bertrand lens
Analyzer
Reflected light polarizer
Reflected light illuminator
Nosepiece
Analyzer
Reflected light polarizer
Coarse and fine focus knobs
Binocular tube
Diopter adjustment ring
Diaphragm centering screws on
reflected light illuminator
Aperture diaphragm
Field diaphragm
Nosepiece
Coarse and fine focus knobs
Brightness adjustment knob
Page 25
(Chapter)
9
9
5/9
12
12
12
12
5
12
12
5
9
9
12
12
12
5
5
5/9