Requirements For Product Use; Technical Requirements - Festo CPX-FVDA-P2 Traducción Del Manual De Instrucciones Original

CPX-FVDA-P2

Requirements for product use

S
Make this brief description available to the design engineer, installer and per-
sonnel responsible for commissioning the machine or system in which this
product is used.
S
Keep this brief description throughout the entire service life of the product.
S
Make sure that the specifications of the documentation are always complied
with. Also consider the documentation for the other components and modules
(e.g. bus nodes, pneumatics, etc.).
S
Take into consideration the legal regulations applicable for the destination as
well as:
– regulations and standards
– regulations of the testing organizations and insurers
– national specifications
S
Remove all transport packing such as foils, caps, cardboard. The material used
in the packaging has been specifically chosen for its recyclability (exception:
oil paper = residual waste).
S
Have mounting performed professionally. To maintain the IP protection class:
– Screw the connection block on tight (
ule)
– Mount cable entry and seals professionally
– Seal unused connections with cover caps
S
After a safety demand, such as emergency stop, make sure that the system
restart takes place only under control of the safety controller.

Technical requirements

General conditions for the correct and safe use of the product, which must be ob-
served at all times:
S
Comply with the technical operating limits (
Only then is operation of the product in accordance with the relevant safety
regulations ensured.
S
When connecting standard ancillary components, also observe the specified
limit values for temperatures, electrical data and torques.
38
mounting of the electronics mod-
Technical data).
Festo CPX-FVDA-P2-Z6 1209NH English