Range Of Application And Certifications - Festo CPX-FVDA-P2 Traducción Del Manual De Instrucciones Original

CPX-FVDA-P2

Range of application and certifications

The product is a safety component as defined in the Machinery Directive
2006/42/EC and carries the CE marking.
Standards and test values, which the product must comply with and fulfil, can be
found in the section "Technical data". The product-relevant EU directives can be
found in the declaration of conformity. Certificates and the declaration of conform-
ity for this product can be found at www.festo.com.
S
Observe that compliance with the named standards is limited to the output
module CPX-FVDA-P2. From the perspective of the output module, all discon-
nectable parts of a CPX terminal valve terminal are treated as an external load.
Certain configurations of the product have been certified by Underwriters Laborat-
ories Inc. (UL) for the USA and Canada. These configurations bear the following
mark:
UL Recognized Component Mark for Canada and the United States
Only for connection to a NEC Class 2 supply.
Raccorder Uniquement a un circuit de Classe 2.
Note
Observe the following if the UL requirements are to be complied with in your
application:
– Rules for observing the UL certification can be found in the separate UL-spe-
cific documentation. The relevant technical data there also apply with priority
if they do not influence the safety engineering characteristic values in an
impermissible manner.
– The technical data in this documentation may show values deviating from
this.
40
Festo CPX-FVDA-P2-Z6 1209NH English