Maintenance And Cleaning - brennenstuhl L130 Instrucciones De Utilización Y De Seguridad

Light adjustment (LUX):
The light adjustment setting determines from what
light intensity the light system switches on.
Wait until the required lightness of the surroundings
has been reached.
Fully turn the light control LUX fully towards the
symbol .
Slowly turn the control into the direction of the
symbol , until the light switches on when it
registers movement.
From now on the light will switch on at the
preset light intensity.
Motion sensor: passive infrared sensor
Detection range: up to 12 m / up to 180°
(horizontally)
Setting the timer: about 15 sec. - 5 min.

Maintenance and Cleaning

Note: The LED spotlight does not contain any ser-
viceable components. The LEDs cannot be ex-
changed.
Please do not use solvents, acidic cleaners etc.
Please only use a dry or damp cloth for clean-
ing.
Disposal
Dispose of electrical goods in an environ-
mentally friendly way!
Do not dispose of electrical equip-
ment in the household waste!
In accordance with European Directive
2002 / 96 / EC relating to old electrical and elec-
tronic appliances, used electrical equipment must
be collected separately and recycled in an ecologi-
cally compatible way.
LED-Strahler_Content_L130-L130 PIR_EU.indd 7
Contact your local authorities for information on
how to dispose of the appliance at the end of
product life.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · 72074 Tübingen · Germany
H. Brennenstuhl S.A.S.
F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
For further information, we recommend you visit the
service section / the FAQs on our homepage
www.brennenstuhl.com
GB 7
25.05.12 15:55