Maintenance And Cleaning - brennenstuhl LDN 2405 IP44 Instrucciones De Utilización Y De Seguridad

Setting the timer (TIME):
The control TIME lets you choose a user defined
lighting time of between 15 seconds and 5 minutes
after the last movement has been registered. Turning
the TIME-control clockwise increases the time span.
Light adjustment (LUX):
The light adjustment setting determines from what
light intensity the light system switches on.
Switching to the symbol sets the lamp to switch
on during day and night; when set to , the lamp
will only turn on at night when triggered by the
motion sensor.
Wait until the required lightness of the surroundings
has been reached.
Fully turn the light control LUX fully towards the
symbol .
Slowly turn the control into the direction of the
symbol , until the light switches on when it
registers movement.
From now on the light will switch on at the
preset light intensity.
Motion sensor: passive infrared sensor
Detection range: up to 12 m / up to 180°
(horizontally)

Maintenance and Cleaning

Note: The LED spotlight does not contain any
serviceable components. The LEDs cannot be
exchanged.
Please do not use solvents, acidic cleaners etc.
Please only use a dry or damp cloth for
cleaning.
SMD-LED-Leuchte_Content_LDN_2405_EU.indd 7
Disposal
Dispose of electrical goods in an
environmentally friendly way!
Do not dispose of electrical equip-
ment in the household waste!
In accordance with European Directive
2012 / 19 / EC relating to old electrical and
electronic appliances, used electrical equipment
must be collected separately and recycled in an
ecologically compatible way.
Contact your local authorities for information on
how to dispose of the appliance at the end of
product life.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ・F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
For further information, we recommend you visit the
service section / the FAQs on our homepage
www.brennenstuhl.com
GB 7
18.03.15 09:38