Maintenance And Cleaning - brennenstuhl ML CN 110 IP65 Manual De Instrucciones

Mobile Chip LED Light

MaINTENaNCE aND CLEaNINg

Prior to cleaning and maintenance, please unplug the power cable from the outlet.
All maintenance work must be carried out by a qualified electrician.
PLEASE NOTE: The LED light does not contain parts that need servicing. The LED light source
cannot be replaced. If necessary, replace the entire light.
Do not use solvents, corrosive cleaners or the like. Use a dry or slightly moist cloth for cleaning
only.
Dispose of electrical devices in an environmentally responsible manner!
Do not dispose of electrical devices with household rubbish!
In accordance with Directive 2012/19/EU on waste electrical and electronic equipment,
used electrical equipment must be collected separately and reused or recycled in an
environmentally responsible manner.
Please contact your local authorities for available disposal options for your worn-out device.
addresses
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
5 rue de l'Artisanat · F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com
Operating Instructions
D
5