Adjusting The Tray Loader Shelves - Checchi & Magli DUAL 12 COMPACT Serie Manual De Uso Y Mantenimiento

Adjusting the tray loader shelves

The shelves can be adjusted heightwise, they can be
moved either farther apart or closer together, and the
tilt angle can also be altered.
Adjust the shelves according to the size of seedlings, po-
sitioning them so that the operator is as comfortable as
possible when picking up the seedlings from the trays.
A
D
A
D
UN41-0499MM
Proceed as outlined below.
1) Unscrew the nuts (A).
2) Remove the screws (B).
3) The shelve at the required height so that the existing
holes in the uprights (D) can be used for fastening
purposes.
English language
ADJUSTMENT INFORMATION
C
B
B
C
WARNING
Before unscrewing the bolts, prop up the shelves
to prevent any sudden movements causing an acci-
dent.
B
C
4) Insert the screws (B) and the washers (C).
5) Tighten the nuts (A).
Repeat the same procedure to adjust the other shelf.
26
B
C
Use and maintenance
5
A
D
D
A