Replacing The Planting Unit Chain - Checchi & Magli BABY TRIUM Serie Manual De Uso Y Mantenimiento

Replacing the planting unit chain

A
UN41-0726EO
For this operation, proceed as outlined below.
1) Unscrew the screws (A).
2) Remove the casing (B).
3) Unscrew the screws (G).
4) Unscrew the nuts (C).
5) Remove the casing (D).
6) Remove the chain from the tensioner.
CAUTION
The tensioner could move unexpectedly, causing in-
jury to the hands.
Proceed with the utmost caution.
English language
INFORMATION CONCERNING REPLACEMENTS
E
7)
8)
9)
10) Fit the joining link (E).
NOTICE
Take special care to fit the link correctly and in the
direction indicated in the figure.
11) Fit the casing (D).
12) Tighten the nuts (C).
13) Tighten the screws (G).
14) Fit the casing (B).
15) Tighten the screws\ (A).
45
C
Remove the joining link (E).
Remove the chain from the pinions.
Fit a new chain on the pinions and the tensioner.
8
G
C
D
Use and maintenance