dirna Bergstrom Bycool Green Line Dinamic 1.2 Manual Del Usuario página 10

DINAMIC 1.2
EN
A
Equipment does not start.
When connecting the power wire
B
of the unit, it makes intermittent
beeps.
C
The symbol
D
Equipment does not respond to
remote control.
E
one compressor do not work.
F
E0 is flashing on display.
G
E6 is flashing on display.
H
Electro does not work.
Symptom
appears on display.
• Fuse is blown.
• Power cable is disconnected or cut.
• Power wiring is inverted.
• Connectors tape is inverted.
• Low battery.
• Controls are not programmed anymore.
• Controls battery is flat, led is not
turned on.
• Electronic control is broken down.
• Faulty controls.
• Lack of tension in the battery
• Bad connection of terminals.
• Faulty control module.
• Broken down compressor.
• Bad contact of probe cables or
terminals
• Broken down Temperature probe.
• Bad contact of probe cables or
terminals
• Broken down antifreeze probe.
• Blocked or broken down electro.
• Electronic control is broken down.
• Terminals are disconnected.
10
10
Air conditioning for vehicles
Cause