BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje página 59

„ „ Attach the plastic spacer frame.
„ „ Position the stainless steel outer frame on
the spacer frame.
„ „ Plug the flat ribbon cable of the outside
module onto the terminal board.
The red mark on the flat ribbon
cable must face in the direction of
the terminal clamps.
„ „
Once the function test has been success-
fully performed, clip in the module.
„ „ Caution: once the module has been clipped
into the supporting frame it is difficult
to remove. It may be damaged when it is
removed.
59