Deleting All User And Master Fingers - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

6.6

Deleting all user and master fingers

NOTE
„ „ The device is operational, only the blue LED
lights up.
„ „ Drag a master finger across the sensor, the red
and green LEDs light up briefly.
„ „ Once the master finger has been scanned twice,
the red and green LEDs flash to indicate that
deletion mode is being initialised.
„ „
The deletion operation starts after the master
finger has been dragged across for the third
time. The green LED lights up to signal this.
„ „ The device is then in the delivery condition
(red, green and blue LEDs light up).
Carrying out a re-pairing procedure will also reset
the fingerprint scanner.
This also deletes all fingers (including master fin-
ger). The master code is reset!
73