Installation and operating instructions
B-55600-20-1-8 | B-55600-20-4-8 | B-55600-23-1-8 | B-55600-23-4-8
Fingerprint scanner and code keypad
7.3
In the "index administration" operation mode, you can specify the switching
duration per relay separately.
Master finger
EN
80
„
„
If the scanning operation is of insufficient
quality, the red LED lights up. In this case repeat
the user finger teach-in operation.
„
„
The teach-in operation is completed by a time-
out (wait of approx. 7 s). The operation can be
cancelled earlier by reading in a master finger
again. The red and green LEDs light up briefly.
Setting the relay switching time per relay
(only on-wall/in-wall version)
RT
R1 for relay 1
Switching
or
time
[1...60 s]
R2 for relay 2
07.2017 | XX | Designed in Germany
OK