6.3
Teaching-in master fingers
NOTE
At this time, you must already specify who is going
to maintain the system and create new users.
It is possible to scan 3 different persons, 3 different
fingers as well as the same finger three times. A
maximum of 6 other master fingers can be added
later.
The device is initialised. The red, green and blue
LED light up permanently.
Drag the first master finger across the sensor.
The blue LED flashes.
Wait approx. 3 s. The red and green LEDs flash.
Do not allow more than 60 s to elapse between
the individual master finger teach-in
operations, otherwise the teach-in procedure
will need to be repeated.
Drag the second master finger across the
sensor. The blue LED flashes.
69