Blocking; Teaching-In User Code - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

6.7

Blocking

6.8

Teaching-in user code

It is possible to teach-in a user code using the remote control.
Master
O
finger
„ „ Blocking:
If a finger that has not been taught-in is
dragged across the sensor 5 times in succession
(red LED lights up), the device switches to the
blocking mode. This prevents unauthorised
persons from gaining unhindered access.
If the device is in blocking mode, the red LED
flashes to indicate this. The blocking mode initially
has a time limit. The blocking time extends up to
five times (blocking intervals: 1 minute, 5 minutes,
30 minutes, 1 hour, permanently blocked after that)
following each subsequent failed attempt.
„ „
Unblocking:
Blocking mode can be cancelled earlier by drag-
ging a taught-in finger (master or user finger)
across the sensor. Subsequently, the door can
be opened with a user finger.
User code
OK
(6-digits)
User code
OK
(6-digits)
75