Teaching-In User Finger - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

7.2

Teaching-in user finger

„ „ The device is operational,
only the blue LED lights up.
The master fingers must not be taught-in as
user fingers!
„ „ Drag a master finger across the sensor, the red
and green LEDs light up briefly.
„ „
Press the "E" (Enroll) button on the
remote control.
„ „
Enter an ID of between 1 and 150 via the
remote control.
„ „
Press "OK" to confirm.
„ „ Drag a user finger across the sensor. If the
teach-in operation has been successful, the
green LED lights up.
„ „ We recommend to teach-in each individual
user fingers 3 times in order to optimise the
detection rate. When this is done, 3 of the 150
available templates will have been used.
With "problematic" fingers, it may be necessary
to teach-in the same user fingers up to 6 times
or use a different finger.
79