Cable Management - PEERLESS SUA746PU Instalación Y Montaje

Roll Adjustment
Adapter plate may be rolled +/- 5°.
4
Loosen four M6 nylock nuts half a turn, grasp edges of display and roll screen to desired position as shown.
Retighten four M6 nylock nuts and place four snap caps (L) onto M6 nylock nuts.
M6 NYLOCK NUTS

Cable Management

Cables may be routed using cable clip (J).
5
Slip cable clip (J) onto bottom of center joint as shown in figure 5.1 and secure cables to cable clip using cable tie
(K) as shown in figure 5.2.
CENTER JOINT
J
fig. 5.1
CABLES
9 of 42
ISSUED: 12-01-09 SHEET #: 095-9295-2 01-23-10
K
fig. 5.2