Before You Start; If Removing An Existing Toilet; Back-To-Back Installation - American Standard VorMax 205AA Serie Manual Del Usuario

Installation video can be found at: http://www.americanstandard-us.com/vormaxtoilet

Before You Start:

Turn Off Water Supply
Recommended fitting type for
back-to-back installations.
1
7302187-100 Rev. A

If Removing An Existing Toilet

Flush to remove water from tank;
sponge remaining water from bowl
before removing toilet.

BACK-TO-BACK INSTALLATION

Depending upon your plumbing and venting conditions, the flow from the
toilet in a back-to-back installation may create a vacuum on the system and
draw water from the opposing bowl. The National Standards Plumbing Code
prohibits the use of a cross fitting for drainage as throw over is possible. The
code does approve a directional "Y" style fitting with proper venting to direct
the water downward and away from the other toilet.
2
Clean Flange
Caution: If leaving floor flange
!
open for more than 1-2 hours,
cover flange to prevent
escaping sewer gases.
2
Press firmly.
Wax Ring