SATA AE1022H Manual Del Uso página 60

c. Dismount the four set screws from the left side panel of the
chassis, and then dismount the left side panel.
e. Insert the column shaft into the column, and fix it with the stud
and washer.
g. Adjust the set screws on both sides of the column.
60
AE1022H/AE1022H-3
中文
EN
d. Connect the air pipe on the column to the 8-to-6 joint, and
remount the siding plate.
f. Connect the cylinder rod to the column with a bolt.
h. Install the column protective cover.
DE RU KO PT JA ES