Chapter Ii Installation Instruction - SATA AE1022H Manual Del Uso

中文
AE1022H/AE1022H-3 EN DE RU KO PT JA ES

Chapter II Installation Instruction

The installation of tire changer must be completed by professionals. Safe and effective use depends on correct installation.
If you have any questions, please contact the authorized dealer of Sata.
2.1 Equipment size and use space
- The tire changer must be placed on a firm flat floor and fixed with bolts.
- The location where the tire changer is to be installed must be provided with power and air source for connection.
- In suitable placement location for tire changer, sufficient operation space must be reserved around the tire changer.
- Ensure that there is enough space above and behind the selected position for the auxiliary arm or reversing arm to work normally.
- Reserve at least 500mm operating space on the right and front of the tire changer for tire mounting and tire pressing.
56