Harbor Breeze BELLEVUE E-BE44ABZ5C Manual Del Usuario página 15

FINAL INSTALLATION
4.
Remove three fitter plate screws (S) from fitter
plate (on underside of motor). Connect male plug
from motor housing (D) to female plug from light
kit fitter (F), matching up the colors on the male
plug with the colors on the female plug for correct
fit. (Fig. 4) Make sure that plugs connect tightly.
5. Align holes in light kit fitter (F) with holes in
fitter plate. Re-insert fitter plate screws (S) that
were removed in previous step. (Fig. 5) Use a
Phillips screwdriver to secure all fitter plate
screws (S).
Remove socket rings (L) from sockets. Attach
6.
glass shades (I) with these same socket rings (L).
(Fig. 6)
Note: Do not overtighten socket rings (L) as glass
may crack or break.
4
Male
Plug
Female
plug
5
S
6
L
15
Fitter
Plate
S
F
F
I