Select The User; Select The Measuring Mode: Standard Or Microlife Averaging Mode - Microlife BP3GX1-5X Manual De Instrucciones

4.5. Select the user

This blood pressure monitor is designed to store 99
measurements for each of two users.
Before taking a measurement, be certain that
the correct user has been selected.
• User 1: slide the user switch upwards to the User
1 icon
• User 2: slide the user switch downwards to the
User 2 icon
4.6. Select measuring mode: standard or
Microlife Averaging Mode (MAM)
This instrument enables you to select either standard
(single measurement) or measurement averaging
mode (automatic triple measurement).
a) To select Standard mode, push the switch on the
side of the instrument upward to Position "1."
b) To select Averaging mode, push the switch
downward to Position "3." Note the "MAM" icon
will illuminate on the display.
If you select 1, then only one measurement will be
taken. If you select 3, the unit will inflate and deflate
three times resulting in one final average.
4.7. Microlife Averaging Mode (MAM)
• In Microlife Averaging Mode (MAM), three measurements are automati-
cally taken in succession and the result is then automatically analyzed
and displayed. Because your blood pressure constantly fluctuates, a
result determined in this way is more reliable than one produced by a
single measurement.
• After pressing the POWER button the selected Microlife Averaging
Mode appears in the display as the MAM symbol.
• The bottom, right-hand section of the display shows a 1, 2 or 3 to
indicate which of the 3 measurements is currently being taken.
1 3
9