Overview Of The Menu Items - Bühler technologies TC-MIDI Guía Rápida

TC-MIDI
But- Section
ton
Display • Switches from the measurement display
to the main menu
or
Menu • Selects the menu item displayed
OK
Enter • Applies an edited value or a selection
Display • temporarily switches to the alternative
measurement display (if option installed)
Menu • Back
Enter • Increase value or browse selection
• Note:
▪ Press button 1 x = changes para-
meter / value by one;
▪ Hold button = fast mode (numerical
values only)
▪ Display flashes: modified parameter/
value
▪ Steady display: original display/value
Display • temporarily switches to the alternative
measurement display (if option installed)
Menu • Next
Enter • Reduce value or browse selection
Menu • Move one level up
ESC
Enter • Return to menu
Changes will not be saved!
• Sets a menu to favourite.
F
(Note: The favourite menu will also be ac-
or
tivated with the menu locked!)
Func
5.1.1 Lock Menu
Some menus can be locked to prevent inadvertently changing
the settings of the unit. This requires setting a code. For in-
formation on setting up or disabling the menu lock please
refer to "Global Settings" (toP) under menu item toP > Loc.
The menu lock is not enabled at the time of delivery, all menu
items can be accessed.
With the menu locked, only the following menu items will be
visible without entering the correct code:
Menu item Explanation
toP > unit Temperature unit selection (°C or °F).
BX440016 ◦ 12/2016
Functions
Menu item Explanation
F or Func. Accessing the Favourites menu
NOTICE! This menu may be one that is nor-
mally locked.

5.1.2 Overview of the menu items

When pressing the OK button in normal mode, the display will
show the prompt code if the menu is locked. Use the ▲ and ▼
buttons to enter the correct code and press OK.
If an incorrect code or no code is entered, the menu will not be
unlocked and you will not be able to access all menu items.
If you forgot the password you can always enter master code
287 to access the menu; the menu will be unlocked.
The following image shows an overview of the menu struc-
ture.
Items with a dashed frame will only appear with the respect-
ive settings or with the respective status messages.
The factory defaults and settings ranges are specified in the
overview as well as under the respective menu item. The fact-
ory defaults apply unless otherwise agreed.
You can cancel entries and menu selections without saving by
pressing the ESC key.
1
Menu:
top
Top Settings
Globale Einstellungen
4
Parameter:
Eingabe 5'C
-20 . . . 60 'C
7
oP
Auswahl
op haLf Lo hi
Optional
menu nav-
igation:
2
1. Menu designation
2. Display
3. Brief description
3
5
4. Value input
5. Factory preset
6 Parameter range
6
.
8
7. Selecting from the list of val-
ues
8
. Factory preset
9
9 Parameter range/selection
.
10
1 dashed box = Optional
0
.
Bühler Technologies GmbH 13