Cleaning; Cleaning The Kombimotor; Clean The Contact Surfaces Of The Connecting; Cord - Stihl KMA 130 R Manual De Instrucciones

Ocultar thumbs Ver también para KMA 130 R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

22 Cleaning

22 Cleaning

22.1 Cleaning the KombiMotor

WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before carrying out
any cleaning work, @ 8. Users of this KombiMotor should
carry out only the cleaning described in this manual.
To clean the KombiMotor:
► Clean polymer components with a slightly dampened
cloth. Do not use detergents or solvents. They may
damage the polymer components.
► Do not use a pressure washer to clean the unit or spray it
with water or other liquids.
► Keep the socket free from foreign matter and clean as
necessary with a soft brush or soft, dry cloth.
NOTICE
Never spray the KombiMotor with water. Spraying it with a
stream of water could result in damage to the electronics
and other systems.

22.2 Clean the Contact Surfaces of the Connecting

Cord

► Remove the Connecting Cord, @ 15.2.
1
1
0458-805-8621-A
► Clean the contact surfaces (1) with a dry cloth.
► If a dis-coloration (arrow) is still visible on the contact
surfaces: Sand down the dis-coloration with a fine P 600
sand paper until the contact surfaces shine again.
1
English
37

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido