Safety Information - Trix EP 3/6 Serie Manual De Instrucciones

Function
This locomotive has the following equipment
and features :
G This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards)
with conventional DC power packs (12 volts).
G This locomotive is equipped with an eight-pole
electrical connection for retrofitting it with a digital
decoder complying with NEM Standard 652.
G Headlights change over with the direction of travel.
The necessary maintenance that will comes due
with normal operation is described below.
Please see your authorized Trix dealer for repairs or
spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Trix have been installed in Trix products
or where Trix products have been converted in such
a way that the non-Trix parts or the conversion were
causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or
the conversion in or of Trix products was not causal
to the defects and / or damage arising, is borne by
the person and/or company responsible for the
installation and / or conversion, or by the customer.

Safety Information

G This locomotive is only to be used with the ope-
rating system it is designed for.
G This locomotive must not be supplied with power
simultaneously by more than one power source.
G Please make note of the safety information in the
instructions for your operating system.
5