Safety Warnings - Trix 85 Serie Manual De Instrucciones

Function
This locomotive has the following equipment
and features :
G This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards)
with conventional DC power packs (12 volts).
G This locomotive is equipped with an electrical
interface connection for digital operation
(NEM Standard 652) and can be retrofitted with
the 66833 Selectrix locomotive decoder.
G Headlights change over with the direction of travel.
G Locomotive can be retrofitted with a smoke
generator.
The necessary maintenance that will comes due
with normal operation is described below.
Please see your authorized Trix dealer for repairs or
spare parts.
4
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by TRIX have been installed in TRIX pro-
ducts or where TRIX products have been converted
in such a way that the non-TRIX parts or the con-
version were causal to the defects and / or damage
arising. The burden of presenting evidence and the
burden of proof thereof, that the installation of non-
TRIX parts or the conversion in or of TRIX products
was not causal to the defects and / or damage arising,
is borne by the person and/or company responsible
for the installation and / or conversion, or by the
customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it.
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.