Start Up - Truper IMP-1/2N Manual Del Usuario

Start Up

Switch on
• Connect the tool.
• To make the square drive turn clockwise (tighten), press
the lower part of the switch (F).
• To make the square drive turn counter clockwise
(loosen), press the upper part of the switch (R).
• To stop the square drive, release the switch.
• Wait until the motor comes to a complete stop before
changing the rotation direction.
Operation
• Set the socket in the nut or lug you want to tighten or
loosen.
• Do not try to make contact with the moving nut or lug.
Do not press the trigger unless the nut or lug is properly set
inside the socket.
• Apply firm and constant pressure without forcing the tool.
Otherwise it can get damaged.
7
ENGLISH