Vehicle Maintenance Plan (To Be Carried Out By Customer) - Kärcher MIC 50 Manual Del Usuario

authorised Kärcher Customer Service, in accordance with the in-
spection check list.
 Daily before starting operation, see chapter 7.2 Safety check.
 Lubricate all bearings after washing the vehicle.
 If necessary have the safety checks according to the applica-
ble local regulations performed by the Customer Service de-
partment.

12.4 Vehicle maintenance plan (to be carried out by customer)

Pos. Assembly
1 Cabin dust filter
2 Steering
3 Coolant expansion reservoir
4 V-belt
5 Screw connections
6 Engine air filter
7 Engine oil
8 Engine oil filter
9 Hydraulic oil tank
10 Hydraulic couplings and connec-
tions
11 Battery
12 Exhaust system
13 Parking brake
14 Radiator
15 Tyres
16 Wiping water container
17 Lighting and horn
18 Air-conditioner / heater
19 Warning sticker
Activity
Check for contamination.
Clean or renew a contaminated dust filter.
Renew
Visual inspection
Check the bearings on the steering cylinder for
play.
Check the coolant level.
Check the mixing ratio water / antifreeze.
Check the tension.
Visual inspection; tighten if needed.
Check for contamination.
Clean or renew contaminated engine air filter.
Renew
Check the oil level prior to travel commence-
ment.
Renew
Renew
Check the hydraulic oil level.
Check for leaks.
Check the battery for voltage, and is firmly in
place and leak-proof.
Check the electrolyte level and electrolyte
density in the cells (only low-maintenance bat-
tery).
Check the battery poles for oxidation, brush off
if necessary, and lubricate with terminal
grease. Make sure the connection cables are
firmly in place.
Check the condition of the connecting ele-
ments and make sure they are firmly in place.
Visual inspection of the exhaust system for
cracking and leaks.
Check it is working correctly and is correctly
set
Visual inspection of engine coolant, charge air
and hydraulic oil cooler for damage, firm fit,
tightness and contamination; clean if neces-
sary.
Check the coolant level.
Check the mixing ratio water / coolant.
Check the coolant hoses for leaks and dam-
age.
Check the condition and filling pressure.
Check the filling level.
Check they are working correctly.
Check for functionality and leaks. Disinfect the
evaporator for the air-conditioner.
Check the legibility, replace if necessary.
English
 The intervals for inspection and maintenance work to be per-
formed by the customer are listed in the following table.
Additional maintenance work is to be carried out by the Cus-
tomer Service department in accordance with the inspection
checklist after 250, 500 (annually), 1000, 1500 or 2000 oper-
ating hours. Please inform the Customer Service department
in time.
Daily
X
X
X
X
X
X
X
X
Weekly every 500 hours
or once-a-year*
X (depending X
on environ-
mental condi-
tions)
X (earlier if need-
ed)
X
X
X
X
X X
X X
X
X (earlier if need-
ed)
X
X
X
X
X X
X X
X
X X
X X
X X
X
X
X X
X
X
X
X
X
71