Teletext Function - Lenco DVT-1541 Manual De Operación

TELETEXT Function

Teletext is an optional function, therefore only the sets with the teletext system can receive the
teletext broadcast.
Teletext is a free service broadcast by most TV stations which provides up-to-the-minute
information on news, weather, television programs, stock prices and many other topics.
The teletext decoder of this TV can support the SIMPLE and FASTEXT systems. SIMPLE (standard
teletext) consists of a number of pages which are selected by directly entering the corresponding
page number. FASTEXT is a more modern method allowing quick and easy selection of teletext
information. Because the teletext pages are color coded along the bottom of the screen and are
selected by pressing the corresponding colored button.
1. button
Press this button to display or close the
teletext in TV or SCART video mode.
2. button
Press this button to disable teletext
display and wait for page updates and
press again to resume.
3. button
Press this button to select the index
page.
4. button
Press this button once to display the
concealed information, such as solution of riddles or puzzles; press again to remove the riddles
information from the display.
5. button
Press this button to hold the current page and press again to resume.
6. button
Press this button the first time to double the size of teletext letters in the upper half of the
screen, a second time to double the size of teletext letters in the lower half of the screen and a
third time to resume normal status.
7. button
Press this button to select four groups of 3-digit numbers that are displayed in different colours
at the bottom of the screen. Press the color buttons on the remote control to select, then use
the number buttons to input the corresponding number to display the page.
Repeat the above procedures for each page to be stored, using a different color button each
time.
8. button
Press this button to display the real clock and press the EXIT button to exit.
- 25 -