Dvd System Setup; General Setup Page - Lenco DVT-1541 Manual De Operación

DVD System Setup

Preparations
1. Connect to the power supply and turn on the unit.
2. Press the INPUT or DVD button to select DVD mode.
3. Press the SETUP button on the remote control to display the settings menu. The menu
includes General setup, Audio setup, Video setup, Preference and Password setup.
4. Press the
will appear on the screen.
5. Press the SETUP button again to exit the setup.

General Setup Page

Press the SETUP button to enter the General Setup Page. The screen will display as the below:
TV Display
Angle Mark
button on the remote control to select a category. All the items in the category
1. In the menu, use the
desired item.
2. Press the ENTER button to enter the item.
3. Press the button to return.
1. Press the
2. Press the ENTER button to enter.
3. Use the button to select items.
4. Press the ENTER button again to confirm
selection and return to the previous menu.
1. Press the
2. Press the ENTER button to enter.
3. Use the button to select On or Off.
4. Press the ENTER button again to confirm
selection and return to the previous menu.
- 44 -
button to select the
button to select TV Display.
button to select Angle Mark.