Lenco DVT-1541 Manual De Operación página 52

DVD System Setup
Password Mode
Password Change
1. Press the
Mode.
2. Press the ENTER button to enter.
3. Press the
4. Press the ENTER button again to confirm
setting and return to the previous menu.
You can change the password by yourself.
1. Press the button to select Password.
2. Press the ENTER button to enter.
3. Press the ENTER button again to change the
password.
4. According to the indication on the menu, Use
the number buttons to enter the old password,
then enter the new password, enter the new
password again to confirm. Press the ENTER
button again to confirm setting and return. The
password has been changed successfully.
5. The Default Password is 3308.
- 51 -
button to select Password
button to select On or Off.