Dvb-T Setup; System Setting; Time Setting - Lenco DVT-1541 Manual De Operación

DVB-T Setup

Preparation
1. After connection, press the POWER button to turn on the unit.
2. Press the INPUT/DVB button to select DVB-T mode.
3. Press the SETUP button on the remote control to display the setup menu.
4. Press the
5. Press the SLOW/EXIT button to exit the DVB setup menu.

System Setting

Press the SETUP button to enter the setup menu. Press the
System Setting and press the ENTER button to enter, the screen will display as below:

Time Setting

You can set the TimeZone Setting and the Banner Timer Setting.
Press the direction buttons to select Time Setting, press the ENTER button to enter the menu
as shown below:
1. TimeZone Setting
Select TimeZone Setting and press the ENTER button to enter. Press the
to display different time zones. Press the
Press the ENTER button to confirm.
direction buttons on the remote control to select a category.
In the menu, press the
select the desired item.
Press the SETUP button to return to the
previous menu.
Press the SLOW/EXIT button to exit.
In the menu, press the
select the desired item.
Press the SETUP button to return to the
previous menu.
Press the SLOW/EXIT button to exit.
direction buttons to select the desired item.
- 27 -
direction buttons to select
direction buttons to
direction buttons to
direction button