Usb And Sd/Ms/Mmc Card Function - Lenco DVT-1541 Manual De Operación

USB and SD/MS/MMC Card Function

Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the INPUT or DVD button to select DVD mode.
4. Insert the USB into the unit's USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the figure below:
Make sure that files are stored in the USB and SD/MS/MMC card before connection.
5. Press the CARD button to select disc playback, USB playback or SD/MS/MMC playback. The
default state is disk playback. Please see the figure below:
6. Press the
7. Press the
playback.
8. Press the STOP
menu.
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will
return to the state of disc playback mode.
00:00
001/002
BAK
JPEG
buttons to select the folder and press the ENTER button to enter.
buttons to select the desired track. Then press the PLAY
button to stop playback. Press the MENU/TEXT button to return to the folder
00:00
- 43 -
button to start