CAMPAGNOLO ZONDA Manual Del Usuario página 32

3 -
FITTING THE WHEEL ON THE FRAME
See the "Quick Release" instruction sheet.
10s SPROCKETS
4.1 -
Refer to the instruction leaflet enclosed with the 10s sprockets for all the assembly, disassembly, use and maintenance operations.
4.2 - 11s SPROCKETS of Campagnolo s.r.l. (on FW body for 11s sprockets of Campagnolo s.r.l. )
4.2.1 - ASSEMBLY
1) The sprockets are pre-assembled and timed on the
plastic support (A - Fig. 27). The ring G (Fig. 27) is pro-
vided with a preassembled washer (H); ensure that it is
positioned as in fig. 27.1.
2) Remove the ring (G - Fig.27).
3) Insert the support on the side of the freewheel body,
align the spline patterns, press the sprockets onto the
freewheel and extract the support (A) from the hub (Fig.
27).
4 - SPROCKET ASSEMBLY AND REMOVAL
27
/
USING THE QUICK RELEASE
A
A
G
G
H
27.1
13