Resetting All Values (Reset) - Balluff BTL7-A/C/E5 Serie Manual De Instrucciones

BTL7-A/C/E5 _ _ -M _ _ _ _ -SF-F _ _
Magnetostrictive Linear Position Sensor – Rod Style
9

Resetting all values (reset)

NOTICE
Interference in function
Resetting the values while the system is running may
result in malfunctions.
► Stop the system before performing the reset.
The reset function can be used to restore all the settings
to the factory settings. For a reset the float may also be
located outside the measuring range.
Activate reset
► Press
a and simultaneously for at least 4 s.
b
Reset
► Press
and simultaneously for at least 4 s.
a b
After activation:
⇒ All values are reset.
⇒ Current position value is displayed.
⇒ Reset is deactivated.
Abort reset
Resetting can be aborted without any changes
being saved after the Activate reset step.
► Briefly press
a and
b
⇒ Current position value is displayed.
18 english
simultaneously (< 1 s).
a
> 4 s b
a
> 4 s b
< 1 s a
b
Displayed values (example)
At 0...10 V At 4...20 mA
5.39 V 9.15 mA
10.50 V 3.60 mA
0.00 V 4.00 mA
9.89 V 19.13 mA