Amann Girrbach giroform Modo De Empleo página 17

MOUNTING ALTERNATIVE I:
SECONDARY PLATE
Put a secondary plate onto the
finished Giroform model.
MOUNTING ALTERNATIVE II:
MAGNET AND SOCKET
Block out the pin tips
with putty.
MOUNTING ALTERNATIVE III:
SETTING PINS (GIROFORM CLASSIC)
Set 3 pins into the model plate.
Apply articulating plaster onto the
model and onto the articulator side.
Close the articulator without
pressure.
Put a space retainer foil in the
center and fix it with magnets.
Block out the pin tips with putty,
put a space retainer foil on it.
The result: a precise and neatly
sawed model in the articulator.
Apply plaster onto both sides and
close the articulator without
pressure.
Apply plaster onto both sides and
close the articulator without
pressure.
GB
17