Side Panel; Vertical Divider - Whittier Wood Products 238W Instrucciones De Montaje

D
x 4

SIDE PANEL

7/16"
3. The Side Panels of the base and hutch units are predrilled for the hinge location (see
compatibility chart in step 1 for proper location). Attach two Hinge Plates (B) with 7/16" Hinge
Spacers (C), with the longer arm facing out (arrow on plate points out), using Screw (D) in the
holes. See FIGURE 3.
F
x 4

VERTICAL DIVIDER

F
B
F
4. The Vertical Divider of the base and hutch units are predrilled for the hinge location (see
compatibility chart in step 1 for proper location). Attach two Hinge Plates (B) with 1/4" Hinge
Spacers (E), with the longer arm facing out (arrow on plate points out), using Screw (F) in the
holes. See FIGURE 4.
Page 4 — 238W, 239W, 251W
OR
C
B
OR
1/4"
E
OR
D
D
D
D
FIG. 3
OR
FIG. 4
OR
SIDE PANEL
7/16"
B
OR
VERTICAL DIVIDER
1/4"
E
C
F
F
B