Whittier Wood Products 238W Instrucciones De Montaje página 5

H
x 8
FIG. 5
5. Lay the Door (A) face down on a clean protected surface. Place one Hinge (G) into each of
the holes in the back of the door. Line up the screw holes in the hinge with the predrilled holes
in the door and insert Screw (H). See FIGURE 5.
J
x 2
I
x 2
FIG. 6
6. Attach the Tuscan Bronze Knobs (I) to the Doors (A) with Screws (J). See FIGURE 6.
L
x 4
5/8"
FIG. 7
7. Optional: Complete this step if you wish to conceal the gap between the two doors.
The Door Skirt (K) may be attached to either the left or right door. This will be the door you
close first. With the door laying face down, measure in 5/8" from the outer edge and draw a
line. Lay the inner edge of the Door Skirt (K) on the line, with the bottom edge flush with the
bottom of the door. Attach the Skirt to the door with four Screws (L) through the predrilled
holes in the Skirt.
Hinge
G
Arm
H
H
L
DOOR
J
L
L
I
L
238W, 239W, 251W — Page 5