Leaving A Memo; Telephone Set Up; Programming The Handset Standby Screen - GE THOMSON 21098 Guía De Uso

To erase a message from the handset:
1. Press the MENU button on the handset.
2. Use the ( or ) buttons to select ANSWERER and press SELECT to
enter the menu.
3. Use the touch tone pad or the  or  buttons to select 1 REMOTE
ACCESS. Press SELECT to confirm.
4. Press the key 2 (play/stop) followed by the mailbox number on the
handset. (e.g. Press key 2 and then key 3 to play messages in mailbox 3.)
5. Press key 0 (erase) on the handset to erase a message during playback.
NOTE: Erased messages cannot be restored.

Leaving a Memo

Use the memo feature to leave a message.
1. Press the memo/conference button and it will announce "TO RECORD,
PRESS AND HOLD MAILBOX."
2. Press and hold the play/stop 1, 2, or 3 button. You must hold the button
until you finish recording the memo.
3. Begin speaking after it announces "RECORD MESSAGE."
4. Release the mailbox button when finished.

Telephone Set Up

Programming the Handset
Standby Screen
The handset displays the handset number (or handset name), time and
battery charge.
HANDSET 1
11:30
AM
19