Hree -Way Calling; Emory - GE THOMSON 21098 Guía De Uso

Three-Way Calling
1. During an external call, press the page/int key. LINE ON HOLD
EXTENSION? shows on the display.
2. Use the touch-tone pad to select Handset 1 or Handset 2. You will hear a
paging tone and PAGING shows in the originating handset's display.
NOTE: "PAGING FROM..." shows on the display on the receiving handset, and
the receiving handset presses the page/int or TALK/END/call back button to
answer the intercom.
3. When the receiving handset connects, press the format/conf button on
the originating handset to conference with the receiving handset and the
external caller. CONFERENCE shows on the display on the originating
and receiving handsets.
NOTE: A handset can enter conference mode directly by pressing TALK/
END/call back on the second handset during a call.
Memory
Storing Names and Numbers in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem key to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50) or use the
cid/vol  or  buttons to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear on the display. If the memory
location is empty, "EMPTY" appears on the display.
4. Press the mem key. The display shows ENTER NAME.
5. Use the touch-tone pad to enter a name (up to 15 characters).
6. Press the mem key to confirm and save the record. The display shows
ENTERTEL NUMBR.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses (press the # pause/ringer button), and press the mem
key again to save the record. The unit beeps to confirm.
NOTE: The system treats pauses as delays or spaces in the dialing sequence.
60