Registration; Handset Name - GE THOMSON 21098 Guía De Uso

7. Use the touch tone pad on the handset to select 1 for NO or 2 for YES or
use the  or  buttons to scroll to 1 for NO or 2 for YES. The default is 1
NO.
8. If you select 2YES, press the SELECT button to confirm your selection.
HOLD BASE PAGE WAIT FOR BEEP shows on the display.
9. Press and hold the PAGE/INT button on base unit until you hear a long
tone at the handset. HANDSET X REGISTERED shows in the handset
display, where X is the handset number. You will hear a confirmation
tone.
NOTE: After you have registered one handset, wait 10 seconds before
registering another handset to ensure successful registration.

Handset Name

1. Make sure your phone is OFF (not in talk mode).
2. Press the MENU button to go to the main menu.
3. Use the  or  buttons to scroll to PHONE SETTING.
4. Press the SELECT button to confirm.
5. Use the  or  buttons or touch tone pad to scroll to 4 HANDSET NAME
menu.
6. Press the SELECT button to enter the menu. HANDSET NAME shows on
the display.
1 NO
2 YES

REGISTRATION

25