Installing The Handset; Installing The Phone - GE THOMSON 21098 Guía De Uso

Installing the Handset Battery
NOTE: You must connect the handset battery before use.
1. Locate battery and battery door which are packaged together inside a
plastic bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into
place.
6. Place the handset in the charging cradle.
Allow handsets to charge for 16 hours prior to first use. If you don't properly
charge the handsets, battery performance is compromised.

Installing the Phone

Choose the best location to install your base. Your base should be placed on
a level surface such as a desk or table top.
12
PRESS DOWN
FIRMLY
BATTERY
BLACK WIRE
RED WIRE