5. Installation of Hanger Bracket
5.2
Slide the hanger bracket onto the outlet box screws.
Center the bracket over the outlet box and then securely
tighten the screws (Figure 13).
WARNING
!
Hanger bracket must seat firmly against outlet box. If the
outlet box is recessed, use leveling washers between the
hanger bracket and the outlet box until the bracket is
flush with the ceiling. If bracket and/or outlet box are not
securely attached, the fan could wobble or fall.
Figure 13
10
(Continued)
SECURELY
TIGHTEN
SCREWS
HANGER BRACKET
ETL Model No.: CF717-1