Technical Data; Installation; Important Warnings For Installation - Franke SMART FMO 45 GN 81 Manual De Instalación Y Servicio

TECHNICAL DATA

Specifications
Lamp power
Thermostat
Lower heater
Upper heater
Turbo heater
Grill heater
Supply voltage
Technical specifications can be changed without
prior notice to improve product quality.
The values provided with the appliance or its
accompanying documents are laboratory
readings in accordance with the respective
standards.

INSTALLATION

Ensure that electrical installation is suitable
for operationalising the appliance. If not, call
an electrician and plumber to make necessary
arrangements. Manufacturing firm can't
be hold responsible for damages to arise due
to operations by unauthorized people and
product warranty becomes void.
WARNING: It is customer's responsibility
to prepare the location the product shall
be placed on and also have power utility
prepared.
WARNING: The rules about electrical local
standards must be adhered to during product
installation.
WARNING: Check for any damage on
the product before installing it. Do not have
product installed if it's damaged. Damaged
products pose danger for your safety.
FMO 45 GN 81 / FMO 45 GN 86
45 cm Built-in oven
15-25 W
40-240 / Max °C
1000 W
1000 W
1800 W
2000 W
220 V-240 V 50/60 Hz
These values may differ depending on the use
and ambient conditions. Figures in this guide
are schematic and may not exactly match your
product.

Important Warnings for Installation

Z
Z
Z
Z
– 9 –
Z
Cooling fan shall take extra steam out and
prevent outer surfaces of appliance from
overheating during operation of oven.
This is a necessary condition for better
appliance operation and better cooking.
Z
Cooling fan shall continue operation after
cooking is finished.
Z
Fan shall automatically stop after cooling
is completed.
Z
A clearance must be left behind the enclosure
where you'll place the appliance for efficient
and good operation.
EN