GreenWorks ST24B01 Manual Del Propietário página 11

ASSEMBLY
ATTACHINg THE guARD (See Figure 2.)
NOTE: Install the guard before the attachment is connected to the lower shaft.
1. Invert the string trimmer to access the trimmer head.
2. Slide the guard (1) into the slots on the trimmer head.
3. Align the screw hole on the guard (2) with the screw hole on the trimmer head (3).
4. Insert the screw into the trimmer head, fastening the guard in place using a philips head
screwdriver (not included).
3
2
11
1
Fig. 2.1
Fig. 2.2