Adjusting The Handle - Baby Jogger City Go Manual Del Usuario

ADJUSTING THE HANDLE

1
2
CLICK
CANOPY
1
2
3
There are 4 positions:
A - In vehicle/carry position
B/C - Middle positions
D - Stationary position
1 Squeeze handle release buttons on both sides.
Rotate the handle. The handle will lock into
position.
2 Both adjustment buttons must pop out to lock
handle in place.
WARNING:
is securely locked in the upright carrying position
before carrying.
1 To attach canopy, insert the canopy bow into the
canopy mounting brackets on both sides of the
seat until it clicks into place.
2 Snap canopy fabric to the canopy mounting bracket.
Pull canopy over back of infant restraint.
3 To remove, press release tab and remove from
mounting bracket.
Always make sure the handle
15