Baby Jogger City Go Manual Del Usuario página 31

ADJUST THE WAIST STRAP - SMALLER BABIES
1
2
3
4
5
6
In order to change the waist strap position,
remove the harness, seat pad, chest clip and
the buckle tongues.
For smaller babies:
1 Insert the harness straps up through the
bottom side of the shell through the inner
waist slots with the folded portion of the
strap facing in seating area. Make sure
harness straps are not twisted.
2 Lay pad on seat and pull straps up through
the inner seat pad waist strap slots.
3 Re-attach the buckle tongues and then the
chest clip.
4 Re-insert the harness straps through the
same set of slots in seat pad and shell of
the seat that are appropriate for the size of
your child.
5 Turn the seat over and pull harness straps
through the back of the shell. Re-assemble
straps onto the splitter plate onto loops.
6 Fasten the bottom set of loops onto the
velcro patches on the harness.
31